User`s manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0

3.3 Wireless

 Click on the Wireless link on the navigation drop-

down menu. You will then see two options:

Wireless_11a and Wireless_11g. The

configuration steps are the same for both radios.

3.3.1 Number of Access Points

 Click on the Wireless menu. This status page is like a site survey and displays a list

of Access Points in the area.

 MAC Address: The MAC address or BSSID of the Access Point.

 SSID: The name used to identify the wireless network. The SSID is a unique named

shared amongst all the points of the wireless network. The SSID must be identical on

all points of the wireless network and cannot exceed 32 characters.

 Channel: The channel used to communicate on the wireless network.

 Mode: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).

 Privacy: The type of security used on this network. It may be disabled, WEP, WPA,

etc.

 Type: Wireless configuration mode such as Ad-Hoc or AP.

 Signal (%): The wireless signal strength. Signal quality can be reduced by distance,

by interference from other radio frequency devices and obstruction from obstacles

between the bridge and AP.