User`s manual

Long Range Wireless Access Point / Client Bridge Version 1.0

• 802.1x IEEE 802.1x Authenticator

• MAC address functions MAC address filter (AP mode)

• L2 isolation

• Station isolation

Management

• Firmware Upgrade Upgrading firmware via web browser, setting are reserved after

upgrade

• Reset & Backup Reset to factory default. User can export all setting into a file via

WEB

• MIB MIB I, MIB II(RFC1213)

• SNMP V1, V2c

1.2 Package Contents

Open the package carefully, and make sure that none of the items listed below are

missing. Do not discard the packing materials, in case of return; the unit must be shipped

in its original package.

h 1* 802.11b/g Long range AP/CB (EOC-2610)

h 1* PoE injector (EPE-1212)

h 1* Power Adaptor

h 1* CD with User’s Manual

h 1* Quick Installation Guide (QIG)

h 1* Metal strap

h 1* Special screw set

1.3 Safety Guidelines

In order to reduce the risk of fire, electric shock and injury, please adhere to the following

safety guidelines.

h Carefully follow the instructions in this manual; also follow all instruction labels

on this device.

h Except for the power adapter supplied, this device should not be connected to

any other adapters.

h Do not spill liquid of any kind on this device.

h Do not place the unit on an unstable stand or table. This unit may drop and

become damaged.

h Do not expose this unit to direct sunlight.

h Do not place any hot devices close to this unit, as they may degrade or cause

damage to the unit.

h Do not place any heavy objects on top of this unit.

h Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth for cleaning.

1.4 System Requirements

The following are the minimum system requirements in order configure the device.