User`s manual

Long Range Wireless Access Point / Client Bridge Version 1.0

in the List, only the address listed in the table will have access to the network; all

other clients will be blocked. On the other hand, selected Deny MAC in the List,

only the listed MAC addresses will be blocked from accessing the network; all other

clients will have access to the network.

 MAC Address: Enter the MAC address.

 This table lists the blocked or allowed MAC addresses; you may delete selected

MAC address or delete all the addresses from the table by clicking on the Delete

button.

 Click on the Apply button to save the changes.

Wireless Advanced Settings

 Click on the Wireless Advanced Settings link. On this page you can configure the

advanced settings to tweak the performance of your wireless network. Options

available are: data rate, transmit power, fragmentation threshold, RTS threshold,

protection mode and distance.

 Data Rate: If you would like to force a data rate, you may select one from the drop-

down list. However, for best performance it is recommended to use the Auto setting.

 Transmit Power: You may have the different application distance of the device by

selecting a value from the drop-down list. This feature can be helpful in restricting the

coverage area of the wireless network.

 You can arrange the different data rate in distance in Access Point mode. Please

refer below table. The table only for 11g and 11b/g mix mode

6M-24M 36M 48M 54M

High ˇ ˇ ˇ

Great

Ultra High

ˇ ˇ

Great

N/A

Super

Great

NA N/A

Extreme

Great

N/A N/A N/A

 Fragment: Packets over the specified size will be fragmented in order to improve

performance on noisy networks.