User`s manual

Long Range Wireless Access Point / Client Bridge Version 1.0

Status

 Click on the Status link on the navigation drop-

down menu. You will then see three options: Main,

Wireless Client List, and System Log. Each option is

described in detail below.

Main

 Click on the Main link under the Status drop-down menu. The status that is

displayed corresponds with the operating mode that is selected. Information such as

operating mode, system up time, firmware version, serial number, kernel version and

application version are displayed in the ‘System’ section. LAN IP address, subnet

mask, and MAC address are displayed in the ‘LAN’ section. In the ‘Wireless section,

the frequency, channel is displayed. Since this device supports multiple-SSIDs, the

details of each SSID, such as ESSID and its security settings are displayed.