User manual

42
Step3 Select 5G or 2.4G as your wireless mode.
Step4
Use site survey to scan nearby Access Point and select the certain AP you would like
to connect with or enter SSID manually.
Step5 Select correct authentication type and then enter password.
Auction: Wireless Client IP address must configure manually at the same subnet in Local Area Network or enable DHCP
server of EOA7530 to retrieve IP automatically.
9.2 Client Router Mode
Please refer to last section for the configuration of Access Point.
Step1 Login to the web-based configuration interface with default IP 192.168.1.2
Step2 Change operation mode to Client Router.
Step3 Select 5G or 2.4G as your wireless mode.
Step4 Use site survey to scan nearby Access Point and select the certain AP you would like
to connect with or enter SSID manually.
Step5 Select correct authentication type and then enter password.
Step6 Select your internet connection type base on your Internet Service Provider.
Note: For more details of Internet Connection Settings, Please refer to the Internet chapter.