User manual

33
Login
Specify the Username that is given by your ISP.
Password
Specify the Password that is given by your ISP.
Service IP Address
Specify the Service IP Address that is given by your ISP.
Connection ID
Specify the Connection ID that is given by your ISP.
MTU
Specify the Maximum Transmit Unit size. Suggest remain in Auto.
Type
Select Connection Type from drop down menu.
Keep Connection: Device is connected to internet automatically.
Automatic Connection: Device is automatically connected to internet when the
traffic goes through internet but it will disconnect when a period of idle time
Manual Connection: Connect to internet manually.
Idle Timeout
Specify the maximum idle time for Automatic Connection.
Enable PPTP pass through
on VPN Connection
Place a Check to enable PPTP pass through on VPN Connection. If this feature
disabled, it will cause unable to connect to internet via PPTP.
Enable IPSec pass through
on VPN Connection
Place a Check to enable IPSec pass through on VPN Connection. If this feature
disabled, it will cause unable to transmit IPSec Protocol.
Enable L2TP pass through
on VPN Connection
Place a Check to enable L2TP pass through on VPN Connection. If this feature
disabled, it will cause unable to connect to internet via L2TP.
Apply / Cancel
Press Apply to apply the changes or Cancel to return previous settings.
Auction: If the router's MTU is set too high, packets will be fragmented downstream. If the router's
MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be
unable to establish some connections. In either case, network performance can suffer.