User manual

26
4.7 Wireless Access Control List
Wireless Access Control List is used to Allow or Deny wireless clients by their MAC addresses,
accessing the Network. You can manually add a MAC address to restrict the permission to access
EOA7530.
Enable Wireless Access
Control
Place a Check to enable Wireless Access Control.
Description
Specify the description for the MAC address you about to add.
MAC Address
Specify the MAC Address.
Add
Press Add to add the MAC address.
Reset
Press Reset to cancel the condition of description and MAC Address.
MAC Address Filtering
Table
Check all the conditions you had added.
Delete Selected
Place a Check at Select section, and then press Delete Selected to delete the option.
Delete All
Press Delete All to erase all options in the table.
Reset
Press Reset to cancel the selection.
Apply / Cancel
Press Apply to save the changes or Cancel to return previous settings.
5 LAN Setup
This section will guide you to the Local Area Network (LAN) settings