User manual

Using the provided hardware, the ENH900EXT can be

attached to a wall or a pole.

To attach the ENH900EXT to a wall using wall

mounting kit.

1. Mark the four locations of the mounting holes on the

atmountingsurface.

2. Drilla37mmdeep8mmholeinthemarkingsand

hammer the bolts into the openings.

3. Placethelockandatwashersonthefourhexcapscrews

and drive the screws to attach the bracket to the back of

the Access Point.

4. Tighten the at washers to secure the bracket to the

mounting surface.

Mounting the ENH900EXT