User manual

2 ENH200EXT Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode, ENH200EXT function likes a central connection for any stations or
clients that support IEEE 802.11b/g/n network. Stations and Client must configure the same
SSID and Security Password to associate within the range. ENH200EXT supports 4 different
SSIDs to separate different clients at the same time.
2.2 Access Point with WDS Function
ENH200EXT also supports WDS function in Access Point Mode without losing AP’s capabilities.
Configure others Access Point’s Wireless MAC Address in both Access Point devices to
enlarge the wireless area by enabling WDS Link Settings. WDS function can support up to 8
different AP’s MAC addresses.
Not every Access Point device has support WDS in Access Point Mode. It is
recommended using ENH200EXT if you would like to use this service.
ENH200EXT
Client
Client
Client
ENH200EXT
Client
WDS
ENH200EXT
Client
Client
Client
Client
SSID1
SSID2
SSID3
SSID4
Ethernet
Client
Client Client