User manual

1.3 Package Contents
Open the package carefully, and make sure that none of the items listed below are missing.
Do not discard the packing materials, in case of return; the unit must be shipped in its original
package.
 1* Wireless Access Point / Client Bridge (ENH200EXT)
 1* 24V/0.6A Power Adapter
 1* PoE Injector(EPE-24R)
 1* Pole Mount
 1* QIG
 1* CD (User Manual)
Using other Power Adapter than the one included with ENH200EXT may cause damage of the
device.
1.4 System Requirement
The following conditions are the minimum system requirement.
 A computer with an Ethernet interface and operating under Windows XP, Vista, 7 or
Linux.
 Internet Browser that supports HTTP and JavaScript.
1.5 Hardware Overview
Physical Interface - 1 x Port with PoE support
- 1 x Reset
Data rate 150 Mbps
LEDs status - Power Status
- LAN (10/100Mbps)
- WLAN (Wireless is up)
- 3 x Link Quality (Client Bridge mode)