User manual

Wireless Mode The wireless mode supports 802.11b/g/n mixed modes. It is
compatible with the most common known wireless band.
Channel HT Mode The default channel bandwidth is 40 MHz. The larger channel can
provide better transmit quality and speed.
Extension Channel Specify the upper channel or lower channel selection. It may
influence the Auto channel function
Channel / Frequency The channel availability is based on the country’s regulation.
Auto Place a Check mark to enable Auto channel selection.
AP Detection AP Detection can help to select a best channel by scan nearby
area.
Current Profile Configure up to four different SSIDs, it can help to divide group
of clients to access the network. Press Edit to configure the
profile and place a Check to enable extra SSID.
Profile Isolation Restricted Client to communicate with different VID by Selecting
the Radio button.
Accept / Cancel Press Accept to confirm the changes or Cancel to return previous
settings.
Accept does not compile the changes, you must go to Status -> Save/Load to apply the new
settings. Please refer to the chapter 4.1 for more detail.