User manual

2.3 Client Bridge
In the Client Bridge Mode, the ENH200EXT function likes a wireless client connecting to an
Access Point wirelessly and surf internet whenever you want. Using Site Survey to scan all the
Access Point within the range and configure its SSID and Security Password to associate with
it. Connect you station to the LAN port of the ENH200EXT via Ethernet.
2.4 WDS Bridge
In the WDS Bridge Mode, the ENH200EXT can wirelessly connect different LANs by just simply
configure each other’s MAC Address and Security Settings. This mode is used when two wired
LANs locate in small distance and want to communicate each other. The best solution is using
ENH200EXT wirelessly connect two wired LANs. WDS Bridge Mode can establish 16 WDS links,
the network diagram is like a Star.
WDS Bridge Mode is unlike Access Point. APs linked by WDS are using the same
frequency channel, more APs connected together may lower throughput. Please be aware to
avoid loop connection diagram, otherwise enable Spanning Tree Function.
Access Point /
Wireless Router
Internet
ENH200EXT Client
ENH200EXT
WDS
ENH200EXT
WDS
WDS
Client
WDS
Client ENH200EXT
Client ENH200EXT
ENH200EXT Client