Operation Manual

4.5ConfiguringanAppleMacintoshComputer
ThefollowingproceduredescribeshowtoconfigureTCP /IPonanAppleMacintoshrunningMacOS
10.2.IfyourAppleMacintoshisrunningMacOS7.xorlater,thestepsyouperformandthescreens
youseemaydifferslightlyfromthefollowing.However,youshouldstillbeabletousethis
procedure
asaguidetoconfiguringyourAppleMacintoshforTCP/IP.
1. PulldowntheAppleMenu,clickSystemPreferences,andselectNetwork.
2. VerifythattheNICconnectedtotheENH200isselectedintheShowfield.
3. IntheConfigurefieldontheTCP/IPtab,selectUsing
DHCP.
4. ClickApplyNowtoapplyyoursettingsandclosetheTCP/IPdialogbox.

