User manual

10.2 LAN Settings (Router Mode)
IP Address
Enter the LAN port IP address.
IP Subnet Mask
Enter the LAN IP subnet mask.
WINS Server IP
Enter the WINS Server IP.
Use Router As DHCP
Server
Check this option to enable the ENH200 internal DHCP server.
Starting IP Address
Specify the starting IP address range for the pool of allocated for
private IP addresses. The starting IP address must be on the
same subnet as the ending IP address; that is the first three
octets specified here must be the same as the first three octets in
End IP Address.
Ending IP Address
Specify the ending IP address range for the pool of allocated for
private IP addresses. The ending IP address must be on the
same subnet as the starting IP address; that is the first three
octets specified here must be the same as the first three octets in
Start IP Address.
WINS Server IP
Enter the IP address of the WINS server.
Accept / Cancel
Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).