Operation Manual

User List

Use the User List page to create SNMP users for authen-

tication with managers using SNMP v3 to associate them

to SNMP groups. Click Add to add a new user.

Privilege Mode: Select No Auth, Auth, or Priv se-

curity level from the list.

• No auth – Neither authen-

tication nor the privacy security

levels are assigned to the group.

• Auth – and ensures that

the origin of the SNMP message is

authenticated.

• Priv – Encrypts SNMP

messages.

Authentication Protocol:

Select the method used to au-

thenticate users.

• MD5 – Using the HMAC-

MD5 algorithm.

• SHA – Using the HMAC-

SHA-96 authentication level.

Enter the SHA password and the

HMAC-SHA-96 password to be

used for authentication.

Authentication Password:

Enter MD5 password and the

HMAC-MD5-96 password to be

used for authentication.

Encryption Protocol:

Select the method used to au-

thenticate users.

• None – No user authenti-

cation is used.

• DES –Using the Data En-

cryption Standard algorithm.

Encryption Key:

Enter the Data Encryption Stan-

dard key.

Click the Apply button to accept the changes or the

Cancel button to discard them.