Operation Manual

92
Group List
CongureSNMPGroupstocontrolnetworkaccesson
the Switch by providing users in various groups with
different management rights via the Read View, Write
View, and Notify View options.
Group Name:
Enter the group name that access control
rules are applied to. The group name can con-
tain up to 30 alphanumeric characters.
Security Mode:
Selects the SNMP version (v1, v2c, v3) asso-
ciated with the group.
Security Level:
Select the security level for the group. Secu-
rity levels apply to SNMPv3 only.
• No Auth – Neither authentication nor
the privacy security levels are assigned to
the group.
• Auth – Authenticates SNMP
messages.
• Priv – Encrypts SNMP messages.
Read View:
Management access is restricted to read-on-
only.
Write View:
Select a SNMP to allow SNMP write privileges
to the Switch’s SNMP agent.
Notify View:
Select a SNMP group to receive SNMP trap
messages generated by the Switch’s SNMP
agent.
Click the Apply button to accept the changes or the
Cancel button to discard them.