Operation Manual

87
Dual Image
The Switch maintains two versions of the Switch image
in its permanent storage. One image is the active image,
and the second image is the backup image. The Dual
Image screen enables the user to select which partition
will be set as active after the next reset. The Switch
boots and runs from the active image. If the active image
is corrupt, the system automatically boots from the non-
active image.
Active:
Selects the partition you wish to be active.
Flash Partition:
Displays the number of the partition.
Status:
Displays the partition which is currently
active on the Switch.
Image Name:
Displays the name/version number of the
image
Image Size:
Displaysthesizeoftheimagele.
Created Time:
Displays the time the image was created.
Click Apply to save the changes to the system.