Operation Manual
64
Global Settings
Click to Enable or Disable the IGMP Snooping feature for
the Switch. Next, select whether you wish to use V2 or
V3. Finally, select whether you wish to Enable or Disable
the Report Suppression feature for the Switch.
Status: Select to Enable or Disable IGMP Snooping
on the Switch. The switch snoops all IGMP
packets it receives to determine which
segments should receive packets directed
to the group address when enabled.
Version:
Select the IGMP version you wish to use. If
an IGMP packet received by the interface
has a version higher than the specied
version, this packet will be dropped.
Report Suppression:
Select whether Report Suppression is
Enabled or Disabled for IGMP Snooping.
The Report Suppression feature limits the
amount of membership reports the member
sends to multicast capable routers.
Apply: Click Apply to update the system settings.