Operation Manual

Global Settings

Select whether to Enable or Disable the LLDP feature

on the Switch. Next, enter the Transmission interval,

Holdtime Multiplier, Reinitialization Delay parameter,

andtheTransmitDelayparameter.Whennished,click

APPLY to update the the system settings.

State: Select Enabled or Disabled to

activate LLDP for the Switch.

Transmission Interval:

Enter the interval at which LLDP

advertisement updates are sent. The

default value is 30. The range is from

5-32768.

Holdtime Multiplier:

Enter the amount of time that LLDP

packets are held before packets are

discarded and measured in multiples

of the Advertised Interval. The default

is 4. The range is from 2-10.

Reinitialization Delay:

Enter the amount of time of delay

before reinitializing LLDP. The default

is 2. The range is from 1-10.

Transmit Delay:

Enter the amount of time that

passes between successive LLDP

frame transmissions. The default

is2seconds.Therangeis1-8192

seconds.