Operation Manual

21
IP Settings
The IP Setting screen contains elds for assigning IP
addresses.IPaddressesareeitherdenedasstaticorare
retrieved usingthe Dynamic HostConguration Protocol
(DHCP). DHCP assigns dynamic IP addresses to devices on
a network. DHCP ensures that network devices can have a
different IP address every time the device connects to the
network.
NotethefollowingwhenconguringIPAddresses:
If the device fails to retrieve an IP address through
DHCP, the default IP address is 192.168.0.239.
To access the page, click IP Settings under the System
menu.
IPv4
Select whether to you wish to enable Static or DHCP for
Auto-Conguration.Next,entertheinformationfortheIP
address, gateway, and DNS servers.
To be managed over the network, the Switch needs an IP
Address to be assigned. The IP Settings screen contains
eldsforassigningIPaddresses.IPaddressesareeither
denedasStaticorareretrievedusingtheDynamicHost
CongurationProtocol(DHCP).DHCPassignsdynamicIP
addresses to devices on a network. DHCP ensures that
network devices have a different IP address every time
the device connects to the network.
Important: If the device fails to retrieve an
IP address through DHCP, the default IP address is:
192.168.0.239 and the factory default subnet mask is:
255.255.255.0.
To access the page, click IPv4 under IP Settings in the
System menu.