User manual

44
9. Network Configuration Example
9.1. Access Point
Access Point
Step1 Login to the web-based configuration interface with default IP
192.168.1.1
Step2 Select your country or region’s regulation.
Step3 Select the Radio you would like it function as an Access Point
Step4 Select 802.11 a/b/g/n as your wireless mode.
Step5
Select channel with less interferences or enable auto channel
feature.
Step6
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Step7 Verify VLAN identifier to separate services among clients
Step8 Setup the authentication settings for each SSID.
Step9 Press Apply to save all changes.
Note: For more advanced settings, please refer to the previous chapters.
Wireless Client
Step1 Open wireless client utility software page.
Step2
Use site survey to scan nearby Access Point and select the certain
AP you would like to connect with or enter SSID manually.
Step3 Configure VLAN ID in your wireless device if available.
Step4 Select correct authentication type and password.
Caution: ECB7510’s Access Point Mode does not provide DHCP server so the Wireless Client
IP address must configure manually at the same subnet in Local Area Network
ECB7510
Client
Client
SSID2
SSID1
Ethernet
Client
192.168.1.1
192.168.1.10
192.168.1.11
192.168.1.12