User manual

5.9. WPS (Wi-Fi Protected Setup)

WPS is the simplest way to establish a connection between the wireless clients and the

wireless router. You don’t have to select the encryption mode and fill in a long encryption

passphrase every time when you try to setup a wireless connection. You only need to

press a button on both wireless client and wireless router, and the WPS will do the rest for

you.

The wireless router supports two types of WPS: WPS via Push Button and WPS via PIN

code. If you want to use the Push Button, you have to push a specific button on the wireless

client or in the utility of the wireless client to start the WPS mode, and switch the wireless

router to WPS mode. You can simply push the WPS button of the wireless router, or click

the ‘Start to Process’ button in the web configuration interface. If you want to use the PIN

code, you have to know the PIN code of the wireless client and switch it to WPS mode, then

fill-in the PIN code of the wireless client through the web configuration interface of the

wireless router.

WPS: Enable/Disable WPS function from drop-down list.

Server-side Setup

Self Pin Code: This is the WPS PIN code of the wireless router. You may need this

information when connecting to other WPS-enabled wireless devices.

WPS Current Status: If the wireless security (encryption) function of this wireless router is

properly set, you’ll see a ‘Configured’ message here. Otherwise, you’ll see

‘UnConfigured’.

Software WPS button: Click on the Start to Process to begin the process of the WPS

function.