User manual

3. SYSTEM

3.1. Operation Mode

You are allowed to change the operation mode for both 2.4GHz and 5GHz radios. However,

there are combinations that are not allowed. Please refer the following table for the mode

combinations. Those that marked Yes are considered legal settings.

Operation Mode Matrix

AP WDS CB UR Disable

AP Yes Yes Yes Yes Yes

WDS Yes n/a n/a n/a Yes

CB Yes n/a n/a n/a Yes

UR Yes n/a n/a n/a Yes

Disable Yes Yes Yes Yes Yes

This page allows you to change the operating mode for both radios. You can use the drop

down menu to select AP/CB/WDS Repeater/Repeater mode and you can also disable certain

radio.

Caution: CB/ WDS Repeater/Repeater can only operate in one single radio. You can not use

those operating modes on both radios.