Datasheet

ManualsBrandsEnGenius ManualsNetworkingECB-7510

ECB7510

Wireless Gigabit Dual Band Concurrent Router AP

• 802.11a/b/g/n

• 300 + 300 Mbps

• Concurrent radios

• Multi-Function

Learn more about EnGenius Solutions at www.engeniustech.com.sg

HOME AND HOME OFFICE

ECB7510

ECB7510 Datsa sheet

ersion 21102010

*Theoretical wireless signal rate based on IEEE standard of 802.11 b, g, n chipset used. Actual throughput may vary.Network conditions and environmental

factors lower actual throughput rate.

** All specifications are subject to change without notice

PRODUCT DESCRIPTION

ECB7510 set for speed – optimized for media, music, movies,

gaming: what-ever you’re into, the Simultaneous Dual Band N

Wireless Device will double the bandwidth and media-optimized

performance so you can enjoy it more smoothly, with less lag, all

around.

ECB7510 is defined as multi-function WiFi system so it can satisfy

all different kinds of environment and let System Integrator have

high flexibility to build up Wireless Connection.



Summary of content (7 pages)

PAGE 1
ECB7510 Wireless Gigabit Dual Band Concurrent Router AP • 802.11a/b/g/n • 300 + 300 Mbps • Concurrent radios • Multi-Function PRODUCT DESCRIPTION ECB7510 set for speed – optimized for media, music, movies, gaming: what-ever you’re into, the Simultaneous Dual Band N Wireless Device will double the bandwidth and media-optimized performance so you can enjoy it more smoothly, with less lag, all around.
PAGE 2
Datasheet ECB7510 Features Benefits Multi mode Functions Access Point/Client Bridge / Repeater/ WDS Dual concurrent N Allows simultaneous operation of 2.
PAGE 3
Datasheet ECB7510 Power Requirements 12V1A > Top Panel (LED Status) WPS 1 (Link-> Associate Done, Processing->blink) Power 1 ( Link-> blue static on) 2.4G WLAN 1 ( Link-> blue static on, traffic->blink, WPS) 5G WLAN 1 ( Link-> blue static on, traffic->blink, WPS) Ethernet 1 ( Link-> blue static on, traffic->blink) > WPS Button Behavior Press & Release Active Band LED indication 0~5 seconds 2.4GHz WPS 2.4GHz ON & 5GHz Off 6~10 seconds 5GHz WPS 2.
PAGE 4
Datasheet ECB7510 5 52 108 57.8 120 6 58.5 121.5 65 135 7 65 135 72.2 157.5 8 13 27 14.4 30 9 26 54 28.9 60 10 39 81 43.3 90 11 52 108 57.8 120 12 78 162 86.7 180 13 104 216 115.6 240 14 117 243 130 270 15 130 270 144.4 300 2.412 ~ 2.472 GHz(11.n) 20MHz 2.412 ~ 2.462 GHz (11.n) 40MHz Receive Sensitivity (Typical) 5.18~5.825 GHz (11.n) 20MHz 5.18~5.825 GHz (11.
PAGE 5
Datasheet ECB7510 Available transmit power Mode 2.412 ~ 2.462 GHz(11.b) 1~11Mbps 18 6~9Mbps 18 12~18Mbps 18 24~36Mbps 17 48~54Mbps 16 MCS 0~1/MCS 8~9 18 MCS 2~3/MCS10~11 18 MCS 4~5/MCS/12~13 15 MCS 6~7/MCS14~15 13 6~9Mbps 17 12~18Mbps 17 24~36Mbps 17 48~54Mbps 16 MCS 0~1/MCS 8~9 17 MCS 2~3/MCS10~11 17 MCS 4~5/MCS/12~13 15 MCS 6~7/MCS14~15 14 2.412 ~ 2.462 GHz (11.g) 2.412 ~ 2.462 GHz (11.n) 5.18~5.825 GHz (11.a) 5.18~5.825 GHz (11.
PAGE 6
Datasheet ECB7510 VPN  IP address mapping  Port Forwarding  Port Triggering  ALG(Application Layer Gateway)  DNS Relay  DDNS  Time Zone(NTP client) VPN pass-through (PPTP, L2TP, IPSEC) Isolation Multiple SSID Output Power Control WDS Power saving(Green technology) 64/128 bit WEP Encryption Wireless WPA Personal (WPA-PSK using TKIP or AES) WPA Enterprise (WPA-EAP using TKIP) 802.
PAGE 7
Datasheet ECB7510 Firmware Upgrade Upgrade firmware via web-browser Keep latest setting when f/w update Administrator Setting Administrator password change Reset Setting Reboot (press 1 second) Reset to Factory Default (press 5 seconds) System monitoring Status, Statistics and Event Log SNMP V1, V2c MIB MIB I, MIB II Backup & Restore Settings through Web ENVIRONMENT PHYSICAL Temperature Range 0 to 45° C - Operating, -10 to 70 ° C - Storage Humidity (non-condensing) 15%～95% typical Dimensi