User`s manual

• ESSID Selection: As this device supports multiple SSIDs, it is possible to configure a different
security mode for each SSID (profile). Select an SSID from the drop-down list.
• Broadcast SSID: Select Enable or Disable from the drop-down list. This is the SSID broadcast
feature. When this option is set to Enable, your wireless network name is broadcast to anyone within
the range of your signal . If you're not using encryption then they could connect to your network.
When this is disabled, you must enter the Wireless Network Name (SSID) on the client
manually to connect to the network.
• WMM: Choose to Enable or Disable WMM. This is the Quality of Service (QoS) feature for
prioritizing voice and video applications. This option can be further configured in WMM under
the Wireless drop-down menu.
• Encryption: Select WEP from the drop-down list.
• Authentication Type: Select Open System or Shared Key. Authentication method from the
drop-down list. An open system allows any client to authenticate as long as it conforms to
any MAC address filter policies that may have been set. All authentication packets are
transmitted without encryption. Shared Key sends an unencrypted challenge text string to
any device attempting to communicate with the AP. The device requesting authentication
encrypts the challenge text and sends it back to the access point. If the challenge text is
encrypted correctly, the access point allows the requesting device to authenticate. It is
recommended to select Auto if you are not sure which authentication type is used.