Specifications

46
Advanced Operations
replace the previous setting.
3. Call forwarding to an outside line, may not be supported by all PBX
or Key systems.
4. There is no call forwarding announcement, the caller is not aware
of the call is being forwarded.
5. Call forwarding can be only one-hop. That is, for example, if
Handset 11 forwards calls to Handset 22, but Handset 22 also sets
calls forwarding to another handset, calls for Handset 11 are still
routed to Handset 22.
functions on two separate phone lines.
rd
2. This feature only works for 2 lines, if a 3 phone call comes for the
same handset, the call will not be routed to the handset.
Call Waiting (For DuraFon PRO only)
1. A handset, while talking on one phone line, can be informed of the
arrival of a new incoming phone call.
2. For example, suppose that Handset 15 is talking on Line 1. When a
new call comes in on, Line 4, and the caller enters extension number
*15* when prompted by the AA, or if the call is set to be routed to
Handset 15 when AA is disabled.
3. The base station recognizes that Handset 15 is busy. Instead of
announcing to Line 4 that Handset 15 is busy, the base sends an alert
to Handset 15.
4. Upon receiving the alert, the handset sounds an audible double beep
alert and LCD displays New call on Line 4 .
5. Handset 15 can:
a. Ignore the new call; continue talking to Line 1.
b. Press key to switch to Line 4.
c. Subsequent pressing of key will toggle between Line 1 and
Line 4.
d. Press key while talking to a line will terminate that particular
call and automatically switch back to talking to the remaining line.
Notes:
1. This built-in call waiting is separate from the Call Waiting feature
available from the local phone company. The phone company
provided Call Waiting functions on the same phone line, while the
DuraFon Call Waiting
Switch
FLASH
END