Specifications

28
Re : when a call is coming in from L1, any handset can pick up the call, as
long as the handset are in the coverage of base1~3.
1. Handset Registration.
a. Press button on Base 00(default), four LEDs will light up in
setting mode.
b. Handset operation: Press (It will complete the
registration process).
c. Repeat, as needed, to add handsets.
Note: Additional handsets should be added to the system before
adding additional base units.
2. Establishing additional Base Units:
a. Press button on new Base.
b. Use Handset 10 or 11 to Add base :
Press .
c. Enter 01~07 (base ID).
d. Repeat, as needed, to add base units.
Notes:
1. Only Handset 10, 11 can assign Base ID.
2. Base 00 is a primary base. All handsets must register only on
Base 00.
*Expanding capacity:
User capacity can be
increased by adding
additional base units.
Up to 8 base units can
be supported.
REG
REG
MENU 6 1
MENU 8 1
Legacy
PBX
Base-1 Base-2 Base-3
1234 1234 1234
Getting Started
10

Select Mode
1.Add Base

10

Added Base
Number: **
CANCEL