al Digital Long Range Industrial Cordless Phone Systems Engenius Durafon SP9228-Pro
Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Battery Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Regulatory Information. . . . . .
Handset and Charger Installation..............................29 Basic Operations.......................................................30 Operation Modes.....................................................30 Making a Telephone Call(For DuraFon PRO only).......34 Making a 2-Way/ Intercom Call..................................34 Making a Broadcast.................................................35 Redial(For DuraFon PRO only).................................
Advanced Registration.............................................42 Handset Group Subscription.....................................43 Call Transfer(For DuraFon PRO only)........................44 3-Way Conferencing(For DuraFon PRO only).............44 Call Forwarding(For DuraFon PRO only)...................45 Call Waiting(For DuraFon PRO only).........................46 Line Dedication.......................................................47 Outbound Line Selection (For DuraFon PRO only)......
Caution: Your wireless telephone gives you freedom and flexibility to stay in touch while you move around. However, the safe and responsible use of the phone depends entirely on you. When using your phone equipment, safety instructions should be followed to avoid the risks of fire, electric shock, injury to person, and damage to property. General Safety Instructions 1. When using your wireless phone, ensure your safety and the safety of others: a. Always watch where you are walking and standing. b.
pacemaker wearers '' . However, until more is known, FDA suggests that people with pacemakers may want to take precautions when using or carrying a wireless telephone to ensure that there is ample distance between the telephone and the pacemaker. Do not carry the handset in a breast pocket. If you have any reason to suspect that interference is taking place, turn off your handset immediately. Product Safety Instructions 1. Read and understand all instructions. 2.
power supply. 8. Slots or openings in the product's housing are provided for ventilation. These openings must not be blocked or covered. Placing the product on a bed, carpeting, or other similar surface may block these openings and should be avoided. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. 9.
17. Do not install the base station or the handset charger near microwave ovens, radios, TV sets, speakers, or other electrical equipment. These appliances may cause interference to the product or experience interference from the product. 18. Unplug the base station or the charger adaptor from the wall power outlet and refer servicing to an authorized service center under the following conditions: a. If liquid had been spilled into the product. b. When the power supply cord or plug is damaged or frayed. c.
DuraFon SP9228-PRO FCC ID: NI3-SP922 IC: 3616A-SP922 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. 1.
5. Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your telephone system. Consult with your local phone company for your rights if this happens. 6. This telephone system may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. 7.
You have purchased an exceptional business communications tool from a leading telephone system manufacturer. The EnGenius DuraFon PRO 4-port Industrial Cordless Telephone System is ideal for the users in various business settings. The DuraFon PRO is the longest range, multi-base, multi-line telephone and 2-way radio communications system providing users unparallel mobility and flexibility. The EnGenius handset provides long range 2-way intercom and broadcast communication, without telephone capability.
Equipment Checklist 1. In a Base + Handset package(DuraFon PRO), please find the following components: a. Base Station x 1 b. Base Antenna x 1 c. Base AC/DC Adaptor x 1 d. Handset x 1 e. Low Profile Handset Antenna x 1 f . Optimal Performance Handset Antenna x 1 g. 1700mA Li-ion Battery Pack x 1 h. Charger x 1 i . Charger AC/DC Adaptor x 1 j . Telephone Cord x 4 k. Audio-in Cable x 1 l . Belt Clip x 1 m. User's Manual, Quick Guide, and Warranty Card 2.
Equipment Checklist 4. Optional Accessories a. Outdoor Antenna Kit (including antenna and cable) b. Lightning Protection Kit (including cable) c. DuraPouch d. Belt Clip e. Spare Battery f . Low Profile Handset Antenna g. Optimal Performance Handset Antenna h.
Handset Features Basic Handset Features 1. 4-line LCD (Liquid Crystal Display) (6) (1) (2) (3) (4) (5) (7) (8) (9) d d REDIAL e MENU e a. The LCD display has LED (Light Emitting Diode) for backlighting. b. The 1 st line of LCD consists of icons. c. Icons explanation from left to right. (1) RSSI (Receive Signal Strength Indicator) During a call, the number of bars is proportional to the radio signal strength received. ◎ (2) Call in-progress (ON/OFF-Hook) Indicates if phone line mode is active.
Handset Features d. The 2 nd and 3 rd lines of the LCD, maximum 14 characters each, display status, message, menu selections, or user-editable alphanumerical characters. e. The last line displays the left and right soft keys. Re: There is only right soft key in idle mode of DuraWalkie. Note: ''◎'' means only shown on DuraFon PRO handset. 2. Ringer a. Rings to an incoming call. b. Distinctive alert sounds indicating various events: (1) Single Beep: successful key entry.
Handset Features 6. BROADCAST( ) a. Half duplex broadcasting to handsets for immediate announcement. 7. Left/Right ( / ) Soft Keys a. Make menu selection. 8. Up( ) /Down( ) Scrolling Keys a. Scroll through records and menu selections. b. Adjust receiver voice volume when in Talk mode. 9. END; On/Off ( )Key a. Ends a call. b. Leaves current menu operation, up one level. c. Press for 3 seconds to off the power. Additional Handset Features 1. Multiple handsets registration a. Up to 90 handsets. b.
Handset Features 3. Caller ID(For DuraFon PRO only) a. Displays incoming call phone number and name on the LCD(needs Caller ID service from local telephone company). Note: If behind a PBX or Key system, Caller ID information will only be recognized if the PBX or Key system passes that information through the analog ports. 4. Call Waiting with Caller ID(For DuraFon PRO only ) a.
Handset Features c. Missed Call Log: 10 entries (14-digit phone number, 14-character names, and time stamp), needs Caller ID service from local telephone company. Note: If behind a PBX or Key system, Caller ID information will only be recognized if the PBX or Key system passes that information through the analog ports. d. Phone numbers and names can be saved into phonebook while in display. 8.Any Key Answer (except END, Silent Soft Key) 9.Key-guard 10. Dialing Prefix(For DuraFon PRO only ) a.
Handset Features 14. Key Tone a. Three key-tone volume selections (high/low/off). b. Four key-tone type selections. 15. Call Timer(For DuraFon PRO only ) a. Display call time duration for current call during and immediately after the call. 16. Text Messaging a. Editing Message: from a handset, users can edit the short text message for up to 50 characters. Up to 5 messages can be edited and stored. b. Sending Message: In view mode, handset can send a message to another handset or a group of handsets.
Handset Features 19. Call Conferencing(For DuraFon PRO only ) a. 2-handset and 1-line conferencing. b. 1-handset and 2-line conferencing. 20. Line Selection (For DuraFon PRO only ) a. When enabled from the handset menu, a handset user will be prompted to select from a list of available lines before making an outgoing call. 21. PBX option transfer(For DuraFon PRO only ) a. PBX options transfer via wireless link. b. Transfer specific PBX option to one handset or all registered handsets. c.
Base Illustration Base Features AUDIO L4 L3 Line in L2 L1 DC IN Audio in DC IN Antenna POWER Power LED LINE 1 LINE 2 LINE 3 Digital 4-Line Wireless Telephone System LINE 4 REG Button Reset Button Line Status LED's Basic Base Station Features 1. Antenna a. The antenna port has a reverse thread connector; to remove antenna or cable, turn clockwise; to install, turn counterclockwise. Improper installation may damage the connector. b.
Base Illustration 3. Reset Button a. Restores base station to factory settings. b. Reset button is indented to prevent accidental system reset. c. All handsets (including administrator) and additional base(s) need to be re-registered after a base station reset. 4. Registration Key (REG) Enters registration mode along with handset, assigns handset ID (10-99). 5. L1~L4 Standard RJ-11C/CA-11A connector to plug in the telephone line. 6. Audio-in Jack (3.5mm) 7.
Base Illustration 9 1 2 to select flash key timing. b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms. c. The default value (600 ms) works in most areas. Changing this setting may result in Flash function not working. Change only when you are certain the new value will work. 3. Call Transfer to PBX Extension(For DuraFon PRO only ) a. When the DuraFon PRO is installed behind a PBX system, you can pre-program the feature code of call transfer function. b.
Charger Illustration Charger Features Spare Battery Charging Slot Spare Battery Charging Indicator Handset Charging Slot DC IN 24
Charger Features 1. DC In Connects to Charger AC Adaptor. 2. Handset Charging Slot a. Charge handset battery when handset is placed in cradle. b. Refer to the handset LCD for charging status. (1) Charging: LCD screen showed Charging . (2) Fully Charged: battery status bar stands still and the LCD screen would display Fully Charged . (3) Charge Fail: Should an error occur during charging mode, the LCD screen would display Charge Fail . 3. Spare Battery Charging Slot a.
Getting Started Base Station Installation For best performance, maintain a distance of at least 1 meter (about 3 feet) between the base station and other electronic devices (e.g., TV, computer, stereo, fax machine, answer machine, cordless phone, etc.). 1. Install base station antenna. The base station's antenna port has a reverse-thread connector; to install antenna or cable, turn counter-clockwise; to remove, turn clockwise. Improper installation may damage the connector. 2.
Getting Started 5. To use the Music/Message-On-Hold feature: Connect one end of a standard audio cable into a radio or audio player, and plug the other (3.5 mm) end into the MOH jack on back of the base. Notes: Recommended phone line features from the local phone company: Multiple phone lines hunt group is a useful feature and works well with this phone system. This feature ties multiple phone lines to a single phone number.
Getting Started Re : when a call is coming in from L1, any handset can pick up the call, as long as the handset are in the coverage of base1~3. 1. Handset Registration. a. Press REG button on Base 00(default), four LEDs will light up in setting mode. 6 1 (It will complete the b. Handset operation: Press MENU registration process). c. Repeat, as needed, to add handsets. Note: Additional handsets should be added to the system before adding additional base units. 10 2.
Getting Started Re : Handsets can answer calls from any port or line, unless port is dedicated to a specific handset or group. 1. Handset Registration. a. Press REG button on Base 00(default), four LEDs will light up in setting mode. 6 1. b. Handset operation: Press MENU (It will complete the registration process). c. Repeat, as needed, to add handsets. 2. Establishing additional Base Units: a. Press REG button on new Base. b. Use Handset 10 or 11 to Add base : 8 1. Press MENU c. Enter 01~07 (base ID). d.
Basic Operations Operation Modes Both the base station and handset have levels of operation at which time only certain procedures of functions can be performed. Re: The main difference between DuraFon PRO and DuraWalkie is the handset of DuraFon PRO has the capability to make telephone calls, and the handset of DuraWalkie does not. A. Base Operation Modes 1. IDLE mode- this is the default mode. The intercom, broadcast, and volume keys are active in IDLE mode. 2.
Basic Operations 6. Charging cradle may be wall mounted, but an L bracket should be used for support under the cradle to avoid breaking mounting slots. An L bracket is not included, but can be purchased from a local home center. Note: 1. The handset packaged along with a Base Station is pre-registered at the factory. If you have a new handset, you will need to register the handset with the base station in order to be recognized as a member handset by the base and by other handsets.
Basic Operations DuraFon PRO Main menu Sub-menu 1.Dialed 2.Received 3.Missed 1.KeyGuard 1.Ring Volume 2.Ring Tone 3.Key Volume 4.Key Tone 2.PhoneBook 3.Call Logs 1.Dial Prefix 2.Group Select 3.Forwarding 4.Clear 5.Naming 6.Contrast 7.Backlight 8.Line Select 9.PBX Options 0.Language #.PA On/Off .Reset Phone 1.Register 2.Deregister 4.Sound 5.Settings 6.Registration 7.Text Message 1.Inbox 2.Outbox 8.Multi-base Select Mode: 1.Add Base Admin: 1.System 2.Line Setting 9.
Basic Operations DuraWalkie Main menu Sub-menu 1.KeyGuard 1.Ring Volume 2.Key Volume 3.Key Tone 2.PhoneBook 1.Group Select 2.Clear 3.Naming 4.Contrast 5.Backlight 6.Language #. PA On/Off . Reset Phone 3.Unused 4.Sound 5.Settings 6.Registration 1.Register 2.Deregister 7.Text Message 1.Inbox 2.Outbox 8.Multi-base Select Mode: 1.Add Base 9.Admin Admin: 1.System 2.
Basic Operations Making a Telephone Call (For DuraFon PRO only) 1. Press TALK , wait for dial tone, and then enter phone number. 2. Alternatively, you can enter phone number first then press TALK Key. When using this method, you can use the CLEAR (Left) and DELETE (Right) soft keys to edit the number entered. Delete erases the last digit entered. Clear erases the entire line but remains in the dialing mode. 3. Speed dial by access the entries in the phone book. a.
Basic Operations 1. Press INTERCOM key followed by a two-digit handset ID or Group ID. 2. Press END key to end the call. 3. During the call, press and hold the TALK Key, the speakerphone is active. Notes: 1. Intercom calls can be made regardless if the Base Station is present. 2. If a Group ID is entered, the first handset (belonging to that group) that answer will establish a link with the caller. See Handset Group Subscription. 3.
Basic Operations Notes: 1. You need to continuously press BROADCAST key when doing broadcast. The broadcast will be over once user release the key. 2. You need to notice that there is no bi-bi-beep sound when receiving a broadcast. 3. You can press the SILENT (Left) soft key if you choose to ignore the call. The SILENT key operation is valid only for the current call. You can silent all broadcast by turning off the ringer to set auto-silence from the handset menu. Redial (For DuraFon PRO only) 1.
Basic Operations 4. During the call, press and hold the TALK Key, the speakerphone is active. Notes: 1. You can press SILENT (Left) soft key if you choose to ignore the call. Unlike turning off the ringer (from the handset menu), the SILENT key operation is valid only for the current call. 2. If Caller ID service is available, the LCD will display the incoming call information.
Basic Operations Ending a Call To end a telephone or intercom call, press END key or place handset into charging cradle. Adjusting Receiver (Earpiece) Voice Volume 1. Voice volume can only be adjusted during a call. 2. There are 6 levels of volume selections. Default as volume 4. Use and scrolling key to adjust. 3. The new setting remains effective for all future calls until changed or handset is power down. Placing a Call On Hold (For DuraFon PRO only) 1. For calls held at DuraFon PRO Base only 2.
Basic Operations the coverage area of the base. Once you're out of the base coverage, you can return to stand-by using Clear hold function in the OPTION list item #3. Mute 1. After a link is established, you can press OPTION (Left) soft key and press 0 to mute the handset microphone. 2. When mute is active, the other party will not hear your voice, but you can still hear the other party. 3. To end the mute, press OPTION (Left) soft key and press 0 to unmute the handset microphone.
Basic Operations 2. You need to subscribe the caller ID service from local telephone company to retrieve this data. To Call back from Call Log (For DuraFon PRO only) 1. When you review missed incoming call(s), you can directly call back by pressing TALK Key. 2. The displayed CID number in most cases will be a 10-digit number with the 3-digit area code followed by the 7-digit telephone number. If the area code is unnecessary for calling back, you can follow below rule to adjust the calling back number: a.
Advanced Operations Handset Registration 1. If your handset is purchased as part of a system, it has been preregistered with the base station at the factory. 2. If the Handset ID reads 00 , that means it is a new handset or the ID has been erased. You need to register the handset with the base station. In certain situations, you may want to change a handset's ID. For example, you want to change a particular handset from a user to an administrator (ID 10 or 11), or vice versa.
Advanced Operations f. Press the handset number key 2 , this completes the de-registration process. Upon successful de-registration, the handset will show ID 00 . Notes: 1. The base has a 30 second registration timeout starting from pressing the REG button. The handset has a 12 second registration timeout starting from the time registration or de-registration option has been selected. The base and handset will automatically exit registration mode after timeout. 2.
Advanced Operations g. If the handset ID is already in use by another handset, the administrator will be alerted. In that case, the administrator can choose another ID or asks the handset having the desired ID to vacate by de-registering with the base. h. Perform registration immediately afterward for the handset desiring a specific ID to ensure that the ID is not taken by another handset. Notes: 1.
Advanced Operations Call Transfer (For DuraFon PRO only) 1. While a telephone call is in progress, you can place it on hold and transfer the call. 2. Press HOLD soft key to put call on hold. 3. Press OPTION soft key to enter feature list for selection. 4. Press number 2 and enter a two-digit Handset ID to call another handset extension. a. Un-announced Call Transfer: Press END before the destination handset answers, the call is automatically transferred to the destination handset. b.
Advanced Operations b. After the second line answers, press the CONF (Left) soft key. c. One handset and two phone lines can now talk simultaneously. i. If one phone line hangs up, the handset continues talking to the remaining phone line. ii. If the handset presses END key, the 2nd phone line will be dropped. The handset and the first phone line continue conversation. Notes: 1. 3-way conferencing between 3 handsets is not supported. 2.
Advanced Operations replace the previous setting. 3. Call forwarding to an outside line, may not be supported by all PBX or Key systems. 4. There is no call forwarding announcement, the caller is not aware of the call is being forwarded. 5. Call forwarding can be only one-hop. That is, for example, if Handset 11 forwards calls to Handset 22, but Handset 22 also sets calls forwarding to another handset, calls for Handset 11 are still routed to Handset 22. Call Waiting (For DuraFon PRO only) 1.
Advanced Operations 3. It is recommended to order from the local phone company Hunt Group feature for all your lines and not subscribe to the Call Waiting feature. Line Dedication 1. Line dedication function can be performed by administrator handsets (ID 10 and 11) only. 2. By default all incoming calls will ring all handsets . 9 2 2 for 3. With the administrative handset, press MENU Line Dedication setting. 4. It will first show Line 1 and status.
Advanced Operations i.e. press 1 to select line 1 and press 2 to select line 2. 4. This feature is also supported when selecting a second line during call conferencing. Change System and Line Settings by Administrator 1. There are two system parameters that can be changed by the administrator: clear (de-register) handset ID and set the next handset ID to be assigned by the base. 2. From an administrator handset (Handset 10 or 11), press MENU (Right) soft key. 3.
Advanced Operations Iv. After setting broadcast, press ON (left softkey) to enable the AA. Press OFF (right softkey) to disable the AA. Re: L3 and L4 can be setting as two broadcast lines, repeated above items for setting 2 broadcast line. c. Press 2 to enter Line dedication setting. i. Select base's line and press handset OK (Right softkey). ii. Line Dedicate confirm: Press NO (Right softkey) to go back Line Setting Menu. Press YES (Left softkey) then enter extension number. nd Notes: 1.
Advanced Operations Notes: 1. When entering a phone number, the cursor automatically advances to the next digit field. Use or scrolling key to move the cursor backward or forward to insert or delete. 2. When entering a name, the cursor automatically advances to the next character field if you press a different key for the next character.
Advanced Operations c. For example, you are looking for “EnGenius”, and then press the number 3 once. d. Use or scrolling key to locate the exact record you are looking for . 7. To erase phonebook entry: a. Use or scrolling key or the alphabetical search method to located the record to be erased. b. Press OPTION soft key to enter editing menu. c. Press 1 to erase the designated phone entry. d. LCD shown Are you sure? Press Yes to double confirm your change. 8. To edit phonebook entry: a.
Advanced Operations c. For phonebook receiving party, press 2 to enter receiving mode. i. When entering the receiving mode, LCD shows Ready . ii. Start to receive phonebook, LCD shows Get phonebook from Ext. # : xx . iii. A beep emitted when receiving each phonebook. iv. When the phonebook receiving, 2-digit countdown on the LCD to indicate the phonebook numbers which are waiting for receiving. Re: The phonebook transfer through the wireless interface, it may partially miss transmission by interference.
Advanced Operations 4. Press number 2 , handset enters Line setting menu. a. Enter Base ID(00~07) to access base. b. Press 1 to enter Broadcast setting. i. Press or to select L3 or L4 (the status of setting will be displayed on LCD) ii. Press CHANGE to enter the setting mode, and the base ID will be displayed on LCD. iii. Press ON (left softkey) to enable the broadcast function. Press OFF (right softkey) to disable the broadcast function. iv.
Advanced Operations Menu Operations DuraFon PRO Main menu Sub-menu 1.Dialed 2.Received 3.Missed 1.KeyGuard 1.Ring Volume 2.Ring Tone 3.Key Volume 4.Key Tone 1.Dial Prefix 2.Group Select 3.Forwarding 4.Clear 5.Naming 6.Contrast 7.Backlight 8.Line Select 9.PBX Options 0.Language #.PA On/Off .Reset Phone 2.PhoneBook 3.Call Logs 4.Sound 5.Settings 6.Registration 1.Register 2.Deregister 7.Text Message 1.Inbox 2.Outbox 8.Multi-base Select Mode: 1.Add Base Admin: 1.System 2.Line Setting 9.
Advanced Operations 1. Press MENU (Right) soft key while the phone is in standby. 2. Press 1 to lock keypad (see Key Guard). 3. Press 2 to view, search, erase, edit and transfer the phonebook (see Phonebook). 4. Press 3 to view the last 10 numbers called, received, or missed. Records can be erased or edit/save into the phonebook. a. Press 1 to view the last 10 phone numbers dialed, starting from the most recent one. Use or to scroll through the list. i. Press OPTION (Right) soft key for options.
Advanced Operations 2. Caller ID service is required from your local phone company in order to receive phone numbers, names and time stamps on incoming calls. The Received and Missed Call Logs will register no incoming calls if Caller ID service is not available. 3. The Caller ID feature may not be supported by all PBX or Key systems’ analog ports, check with your equipment provider. 5. Press 4 to set sound-related settings: a.
Advanced Operations d. Press 4 to clear call logs and phonebook: i. Press 1 and confirm to delete the entire phonebook. ii. Press 2 and confirm to clear the three call logs (Called, Received, and Missed). e. Press 5 to edit the name of Custom or Line: e-1. Press 1 to change the power-up LCD display to show, e.g., customer name or other greeting message: e-2 Press 2 to change the name of line, when calls coming, it will indicate the calls came from which line. i.
Advanced Operations you can transfer the PBX options to other handset(s). Re: To transfer PBX options, both parties have to enter the PBX option mode firstly by following bellow: For sending party, press 1 to enter sending mode. * Either press TX ALL (left softkey) to transfer all PBX options to another handset(s). * Or press TX ONE (right softkey) to transfer a specific entry to another handset(s).
Advanced Operations ii. Press OFF (right softkey) to turn off the broadcast function Re: When broadcast setting “Off”, there is an icon indicated in the display, side of the battery icon. l. Press to make Reset Phone i. Press 1 to clear all setting and return to default (all phonebooks, CID logs, handset registration will be cleared). ii. Press 2 to clear all setting but keep handset registration as well. 7. Press 6 to register or de-register handset: See Handset Registration 8.
Advanced Operations i. Press MENU 7 2 to enter outbox text message. ii. Press OPTION soft key to erase or edit the current message: (1) Press 1 and confirm to erase message. Subsequent messages will be moved up in the Outbox. (2) Press 2 to edit message. Follow the instructions above for entering a new message. g. Receiving a text message: i. A double beep alerts the arrival of a text message. ii. The text message remains on the LCD display for 8 seconds and then is automatically stored in the Inbox. h.
Advanced Operations DuraWalkie Main menu Sub-menu 1.KeyGuard 1.Ring Volume 2.Key Volume 3.Key Tone 2.PhoneBook 3.Unused 5.Settings 1.Group Select 2.Clear 3.Naming 4.Contrast 5.Backlight 6.Language #.PA On/Off .Reset Phone 6.Registration 1.Register 2.Deregister 7.Text Message 1.Inbox 2.Outbox 8.Multi-base Select Mode: 1.Add Base 9.Admin Admin: 1.System 2.Line Setting 4.
Advanced Operations 1. Press MENU (Right) soft key while the phone is in standby. 2. Press 1 to lock keypad (see Key Guard). 3. Press 2 to view, search, erase, edit and transfer and edit the phonebook (see Phonebook). 4. Press 3 to set sound-related settings: a. Press 1 to select ringer volume: Use or to scroll through 6 options: Low, Medium, High, Vibrate, Vib and Ring, Off. Press SAVE (Left) soft key to save selection. Default = High. b.
Advanced Operations Default = 8 seconds, meaning that the backlight is always on. The 8-second option will turn off the backlight after 8 seconds of inactivity. ii. Press SAVE (Left) soft key to save setting. f. Press 6 to change Language: i. Use or to scroll through options: English, Spanish, and French. Default = English, meaning the LCD display shows in English. ii. Press SAVE (Left) soft key to save setting. g. Press # to turn Broadcast On/Off i.
Advanced Operations (2) Use or scrolling key to move the cursor backward or forward to insert or delete the characters. For example, you are editing message 1 as Meeting now . (3) When finished, press SAVE soft key to save change. You will see the Text Message ID as 01 on the upper right corner of the LCD screen. e. Sending a text message: i. While viewing the message, press Intercom key followed by a Handset ID or a Group ID (01-07). ii. The current message is sent. iii.
Technical Specifications Electrical Specifications Frequency RF Power Channel Spacing Number of Channels Modulation Multiple Access Frequency Hopping Rate TDMA Frame Length Number of Slots/Frame Number of Users/Carrier Receiver Sensitivity Antenna Connector Antenna Gain TX Power Control Range Telephone Interface Speech Coding Channel Coding Transmission Data Rate User Data Rate Duplex Voice Quality No.
P/N:6709A0273000 Literature order number: 120-0009-01
