Installation Instructions
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
Completion of “Quick Installation Guide”
Kindly visit http://www.wifiabc.com and click on ‘Knowledge base’ for a
complete guide and tutorials on the Captive Portal Ready devices, such as
changing SSIDs, adding or changing passphrase, blocking guest to Local Area
Networks and VLANs configuration.
Troubleshooting notes
Cannot see the SSID “HotspotAABBCC@123.456.7.8”
Make sure the device is properly connected to your Local Area Network or
Internet router which has access to the Internet. If connecting additional devices
by wireless Mesh to the first device, try not to exceed 10 meters during initial
setup. After setup, you can relocate it further. To restart initial setup, power up
device for at least one minute, then press-holding the reset button for 12 seconds
before releasing with a pointed object. You can verify the device’s response
from the LED lights.
Cannot connect to “My Private-AABBCC” or “HotspotAABBCC@123.456.7.8”
The two SSIDs are secured with an encryption pass-phrase. The pass-phrase is
the serial number of the device and also can be located on the ID-sticker (key).
My personal notes:
My memos:
Captive Portal “Ready”
Cloud4Wi