Installation Instructions
Quick Installation Guide
EnGenius Europe | Veldzigt 28, 3454 PW De Meern,
Netherlands | 0900-WIFIABC | www.wiabc.com
Disclaimer: Information may be subject to changes without prior notication.
Follow us
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
Installing additional devices
Because of the Mesh capabilities, additional devices can be added wirelessly
or by the wired LAN. If you want to configure it wirelessly, place the additional
device close to the first device with the wired Internet access.
Step 1
Confirm that the first device is powered up and connected to your Internet
router. Power up the additional device. The device status light will start blinking
constantly for next 2 minutes.
Step 2
In the wireless network scan you can find the SSIDs by ‘My Hotspot is getting
ready’ while the additional device is preparing itself. Once the initial setup is
complete , the device will reboot and now you will find two SSIDs with two
different assigned IP addresses. You can now power if off and relocate the
additional device in the wireless blindspot area where you want to extend the
wireless coverage.
Captive Portal “Ready”
Cloud4Wi