Installation Instructions

ManualsBrandsEngenius ManualsOtherCaptive Portal Ready - Cloud4Wi

Quick Installation Guide

EnGenius Europe | Veldzigt 28, 3454 PW De Meern,

Netherlands | 0900-WIFIABC | www.wiabc.com

Disclaimer: Information may be subject to changes without prior notication.

https://www.linkedin.com/company/engeniuseurope

https://plus.google.com/+EngeniusEuropeBVDeMeern

https://www.youtube.com/user/engeniuseuropebv

https://twitter.com/engeniuseu

Captive Portal “Ready”

Cloud4Wi

*** MUST READ ***

The package labelled “Captive Portal Ready” herein contains a third-party

firmware & management feature. It has distinctly different properties,

configuration and capabilities of that the stock product mentioned in the

datasheet, CD user manual and box packaging. This Quick Installation Guide

supersedes any datasheet, CD user manual and information on the box

packaging to contain important instructions in setting up your EnGenius Captive

Portal Ready wireless networks. Please read and follow this guide thoroughly to

have an enjoyable experience in setting up your EnGenius Captive Portal Ready

wireless network.

Note: Guest authentication feature requires a separate paid subscription from

thirdparty cloud captive providers to work.

Check list:

• An Internet connection should be already setup & ready to use* (ADSL /Ca-

ble/Fiber modem router)

• Modem/Router must provide RJ45 port to connect with EAP300-CP or

ENS202EXT-CP. An Ethernet cable is further required for the ENS202EXT-CP

• Internet browser (Recent version of Microsoft Internet Explorer or Firefox

browser)

• A pencil or pen ready to use “My Personal Notes” on the last page to assist

you in remembering any account names and passwords created

Important notes:

• (*) The Internet connection should give you the ability to ping

www.yahoo.com (resolve DNS) and to normally browse a web page via http

and https (SSL). If in doubt, use a laptop or computer with your existing Internet

connection (which you will be connecting the equipment to) and type

http://www.yahoo.com on your browser. If there is no response, you need to

resolve this with your Internet Service Provider before proceeding further this

Quick Installation Guide.

Installing the first device

STEP 1

Follow the instructions on the users ID-sticker. The sticker is located on the

device.

Go to http://controlpanel.cloud4wi.com and logon with your your account. If

you do not have an account, kindly contact an authorized Cloud4WI

distribution partner.

Summary of content (6 pages)

PAGE 1
Captive Portal “Ready” Quick Installation Guide Cloud4Wi *** MUST READ *** Installing the first device The package labelled “Captive Portal Ready” herein contains a third-party firmware & management feature. It has distinctly different properties, configuration and capabilities of that the stock product mentioned in the datasheet, CD user manual and box packaging.
PAGE 2
Captive Portal “Ready” Quick Installation Guide Cloud4Wi STEP 2 Once you have logged in, click on <+Create New> to activate the device with your account. Under the ‘Router’-menu, kindly ensure the fields are entered as follow: Click on when completed. Router type: EnGenius MAC address: 88:DC:96:XX:XX:XX Note: Change XX to the similar characters as shown on your device or ID-sticker. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, Netherlands | 0900-WIFIABC | www.wifiabc.
PAGE 3
Captive Portal “Ready” Quick Installation Guide Cloud4Wi STEP 3 For EAP300-CP devices After the registration, connect a LAN cable from the LAN port of your existing Internet modem router to the Ethernet port of the EnGenius Captive Portal Ready device and power up. The device will perform an initial setup which the status LED will constantly blink for two minutes. After approximately two minutes, the product is ready. This can be verified by the 3 LEDs on the device.
PAGE 4
Captive Portal “Ready” Quick Installation Guide Cloud4Wi STEP 4 Your device is now ready to use. Connect to the SSID “ My Hotspot” and a simple authentication will appear as below before Internet access is allowed. Changing of guest access For any changes of access such as vouchers, email, sms, social media login by guest, you can login at http://controlpanel.cloud4wi.com with your account and select the desired packages. Kindly note paid subscription applies accordingly.
PAGE 5
Captive Portal “Ready” Quick Installation Guide Cloud4Wi Installing additional devices Because of the Mesh capabilities, additional devices can be added wirelessly or by the wired LAN. If you want to configure it wirelessly, place the additional device close to the first device with the wired Internet access. Step 1 Confirm that the first device is powered up and connected to your Internet router. Power up the additional device. The device status light will start blinking constantly for next 2 minutes.
PAGE 6
Captive Portal “Ready” Quick Installation Guide Cloud4Wi Completion of “Quick Installation Guide” Kindly visit http://www.wifiabc.com and click on ‘Knowledge base’ for a complete guide and tutorials on the Captive Portal Ready devices, such as changing SSIDs, adding or changing passphrase, blocking guest to Local Area Networks and VLANs configuration. My personal notes: Troubleshooting notes My memos: Cannot see the SSID “HotspotAABBCC@123.456.7.