User`s manual

11b/g Wireless Outdoor Multi-Client Bridge/AP Version 1.0

 SNMP Daemon: Select Enable if you would like to use the SNMP feature.

 Read-Only Community Name: Specify the password for access the SNMP

community for read only access.

 Read-Write Community Name: Specify the password for access to the SNMP

community with read/write access.

 Send SNMP Trap: Select Enable if you would like to receive SNMP traps.

 Send Trap To: Specify the IP address that would receive the SNMP traps.

 Trap Community Name: Specify the password for the SNMP trap community.

 Click on the Save Settings button once you have modified the settings.

3.4 LAN Settings (Static / DHCP)

 Click on the LAN link on the navigation drop-down

menu. This feature allows you to configure the

LAN interface using a static IP address or as a

DHCP client. This IP address is also used to

access the web-based interface.