User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1

5.3 TCP/IP Settings

 Click on the TCP/IP Settings link on the

navigation drop-down menu. You will then

see the LAN Interface and SNMP option.

The options are described in detail below.

5.3.1 LAN Interface

 Click on the LAN Interface link under the TCP/IP Settings menu. Using this option

you may change the IP address of the device as well as toggle the DHCP

server/client and 802.1d spanning tree feature.

5.3.1.1 Static IP Address

 IP Address: Enter the IP address.

 Subnet Mask: Enter the subnet mask for the IP address.

 Default Gateway: Enter the IP address for the default gateway.

 DHCP: Since a static IP address is used, this option must be set to Disabled. If this

device is a DHCP client and will receive its IP settings from a DHCP server, then

select Enabled from the drop-down list. Enabling the DHCP client will disable the IP