User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1

5.2 Management

 Click on the Management link on the navigation

drop-down menu. You will then see five options:

operation mode, status, statistics, log, upgrade

firmware, save/reload settings, and password.

Each option is described below.

5.2.1 Operation Mode

 Click on the Operation Mode link under the Management menu. The Operation

Mode allows you to switch from Access Point to Client Bridge mode.

 Select the AP, Bridge or Bridge Router and then click on the Apply Change button.

 Wait for about a minute until you see the Pop-Up message.

 Click on the OK button and then enter the specified IP address into the web-browser.