User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1
27
 ACK Timeout: You may specify a value for the acknowledge timeout.
 Data Rate: Select a data rate from the drop-down list. However, it is recommended to
select auto for the bet performance.
 Output Power Level (OFDM/CCK): You may have the different application distance
of the device by selecting a value from the drop-down list. This feature can be helpful
in restricting the coverage area of the wireless network.
 You can arrange the different data rate in distance in Bridge mode. Please refer
below table. This table only for 11g and 11b/g mix mode
6M-24M 36M 48M 54M
High
ˇ ˇ ˇ Great
Ultra High
ˇ ˇ Great N/A
Super
ˇ Great N/A N/A
Extreme
Great N/A N/A N/A
 Preamble Type: For best performance, all devices on the wireless network should
use the same preamble type. However, the wireless network will still function even
though the wrong preamble type is used.
 Transparent Bridge: Select Enable to activate the Transparent Bridging feature.
The MAC address of this device will be transparent, and clients from either side of
the network will be able to pick each other. The connected AP shall be 3220 series.
 Click on the Apply Changes button to confirm the changes. This device will
automatically restart once these changes have been applied.