User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1
25
4.4 Wireless
Click on the Wireless link on the navigation
drop-down menu. You will then see four options:
basic settings, advanced settings security and
site survey. Each option is described below.
4.4.1 Basic Settings (Infrastructure, Adhoc)
Click on the Basic Settings link under the Wireless menu. Using this option you
may configure the 802.11b/g settings as well as the frequency, channel, and SSID.
Band: Depending on the type of wireless clients that are connected to the network,
you may select B, G, or B+G. If you are not sure about which clients will be
accessing the wireless networks, it is recommended that you select B+G for the best
performance.
Network Type: Select Infrastructure or Adhoc from the drop-down list.
Infrastructure is a point-to-multipoint (PtMp) topology where as Adhoc is a point-to-
point topology (PtP).
SSID: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters.
Desired BSSID Enter the MAC address of AP Radio.
Channel: Select a channel from the drop-down list. The channels available are
based on the country’s regulation. When selecting Infrastructure mode, a channel is