User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1

 IP Address: Enter the IP address.

 Subnet Mask: Enter the subnet mask for the IP address.

 Default Gateway: Enter the IP address for the default gateway.

 DHCP: If this device is a DHCP client and will receive its IP settings from a DHCP

server, then select Enabled from the drop-down list. Enabling the DHCP client will

disable the IP address, subnet mask, and default gateway fields. If the DHCP option

is Disabled, then the IP address, subnet mask, and default gateway fields must be

filled in.

 Click on the Apply Changes button to confirm the changes. This device will

automatically restart once these changes have been applied.

4.3.2 SNMP Settings

 SNMP Daemon: Select Enable if you would like to use the SNMP feature.

 Read-Only Community Name: Specify the password for access the SNMP

community for read only access.

 Read-Write Community Name: Specify the password for access to the SNMP

community with read/write access.

 Send SNMP Trap: Select Enable if you would like to receive SNMP traps.

 Send Trap To: Specify the IP address that would receive the SNMP traps.

 Trap Community Name: Specify the password for the SNMP trap community.

 Click on the Save Settings button once you have modified the settings.