User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1

4.2.7 Password

 Click on the Password link under the Management menu. This option allows you to

create a user name and password for the device. By default, this device is configured

without a user name and password. For security reasons it is highly recommended

that you create a user name and password.

 Enter a user name into the first field.

 Enter a password into the New Password field and then re-type the password into

the Confirmed Password field. Then click on the Apply Changes button.

 By clicking on the Reset button, the user name and password fields will become

blank indicating that the username and password has been disabled.

4.3 TCP/IP Settings

 Click on the TCP/IP Settings link on the

navigation drop-down menu. You will then see

the LAN Interface and SNMP option. The

options is described in detail below.

4.3.1 LAN Interface

 Click on the LAN Interface link under the TCP/IP Settings menu. Using this option

you may change the IP address of the device as well as toggle the DHCP setting.