User`s manual

11b/g Wireless Outdoor Client Bridge/AP Version 2.1
22
 Click on the Browse button and then select the appropriate firmware and then click
on the Upload button.
Note: The upgrade process may take about 1 minute to complete. Do not power off
the device during this process as it may crash the device and make it unusable. The
device will restart automatically once the upgrade is complete.
4.2.6 Save / Reload Settings, Reset to Default
 Click on the Save / Reload Setting link under the Management menu. This option is
used to save the current settings of the device in a file on your local disk or load
settings on to the device from a local disk. This feature is very handy for
administrators who have several devices that need to be configured with the same
settings.
 This page also allows you to reset the device to its factory default settings.
 Click on the Save button to save the current settings to a file on the local disk.
 Click on the Browse button to select the settings file and then click on the Upload
button to load the previously saved settings.
 Click on the Reset button to reset the device to its factory default settings. Click
Restart to reboot the device.