User`s manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.1
48
 IP Address: Enter an IP address for this device.
 Subnet Mask: Enter the subnet mask for this IP address.
 Gateway: Enter the IP address of the default gateway.
 Local Domain Name: Enter a local domain name. This field is optional.
 Click on the Save Settings button once you have modified the settings.
Note: If you change the IP address here, you may need to adjust your PC’s network
settings to access the network again.
4.5 DHCP Server
 Click on the DHCP link under the LAN menu. DHCP stands for Dynamic Host
Configuration Protocol. The DHCP section is where you configure the built-in DHCP
Server to assign IP addresses to the computers and other devices on your local area
network (LAN). In most situations, the router provides DHCP services, and you can
leave this option disabled. However, if for any reason the router does not provide
DHCP services, enable this option. The AP's DHCP Server will then manage the IP
addresses and other network configuration information for wireless clients associated
with the AP. The computers (and other devices) connected to your LAN also need to
have their TCP/IP configuration set to DHCP or Obtain an IP address
automatically.