User`s manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.1
47
 Read-Write Community Name: Specify the password for access to the SNMP
community with read/write access.
 Send SNMP Trap: Select Enable if you would like to receive SNMP traps.
 Send Trap To: Specify the IP address that would receive the SNMP traps.
 Trap Community Name: Specify the password for the SNMP trap community.
 Click on the Save Settings button once you have modified the settings.
4.4 LAN
 Click on the LAN link under the LAN menu. This feature allows you to configure the
LAN interface using a static IP address or as a DHCP client/server.
 This IP address is also used to access the web-based interface.
 Get LAN IP from: Select Static IP (Manual) or DHCP (Dynamic) from the drop
down list. Choose DHCP (Dynamic) if your router supports DHCP and you want the
router to assign an IP address to this device. In this case, you do not need to fill in
the following fields. Choose Static IP (Manual) if your router does not support DHCP
or if for any other reason you need to assign a fixed address to this device.
Note: You cannot choose DHCP (Dynamic) if you have enabled the DHCP Server
option on the DHCP page; this device cannot be both a DHCP client and a DHCP
server.