User`s manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 2.1

4.3.3.1 802.11b Infrastructure / Ad-hoc Mode

 Visibility Status: Select Visible or Invisible. This is the SSID broadcast feature. If

you set this value to Visible, then the clients will be able to find this SSID on a site

survey.

 Channel: Select a channel from the drop-down list. The channels available are

based on the country’s regulation. Place a check in the Auto Channel Select box if

you would like the Access Point to select the cleanest channel.

 Transmission Rate: Select a transmission rate from the drop-down list. It is

recommended to use the Best (automatic) option.

 802.11 Mode: Select 802.11b only. Do not use this option when configured at Ad-

Hoc mode.

 Setting ACK_B Timeout: You may specify a time out value, however, it is

recommended to use the default setting: 48

 Click on the Save Settings button once you have modified the settings.

4.3.4 Wireless 802.11g Configuration

 Click on the 11b link under the Wireless menu.