User's Manual

*None:Click“None”todisablethesettingonthisradio.

This radio is disabled.

*Group Conguration:Clickspecicgroupsofchannels

forperformingautochannelfunction.Forexample,users

canclickU-NII-1andU-NII-3toperformautochannelon

these bands; the mechanism of this AP will select the

relatively optimal channel to peform wireless service.

Data Rate: Select a data rate from the drop-down list. The

data rate affects throughput of data in the AP. Select the

best balance for you and your network but note that the

lower the data rate, the lower the throughput, though

transmission distance is also lowered.

RTS/CTS Threshold:Speciesthethresholdpackagesize

for RTC/CTS. A small number causes RTS/CTS packets to be

sent more often and consumes more bandwidth.

Client Limits: Limits the total number of clients on this radio.

Oncesettingtheceilingofclientnumbers,themaximum

assocaited client devices will be restricted at this number.

Aggregation: Integrate multiple data packets into one

packet to deliver to client devices. This option reduces the

number of packets, but also increases packet sizes.

AP Detection: AP Detection can select the best channel to

use by scanning nearby areas for Access Points.

Distance: Species the distance between Access Points

and client devices. The proper setting for this parameter

may assist Access Points to avoid the improper operation

whentransmittingdataunderaledapplication.

* The Distance setting should be supported on the outdoor

Access Point including EWS870AP and EWS871AP.

Save: Click SavetoconrmthechangesorCancel to cancel

and return to previous settings.