User's Manual

WDS Link Settings

Using the WDS (Wireless Distribution System) feature will allow a network administrator or installer to connect to Access Points

wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to implement.

Note

: Compatibility between different brands and models of Access Points is not guaranteed. It is recommended that the WDS

network be created using the same models for maximum compatibility.

Also note

: All Access Points in the WDS network need to use the same Channel and Security settings.

To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS.

There can be a maximum of four Access Points.

Note

: Only applicable in WDS AP and WDS Bridge modes.

2.4 GHz/5 GHz WDS Link Settings