User's Manual

EUB600 – Dual Band Wireless-N 300Mbps Media USB Adapter

Appendix 2 – How to Set WPS

WPS setting supports two modes :PBC and PIN. The detailed setting steps are as follows:

1.Wireless Connection in PBC Mode

1.1 Enable the router’s WPS-PBC feature.

If your router provides WPS button, just press and hold it for about 1 second, then the WPS LED

will be flashing for about 2 minutes, which indicates the router’s WPS feature has been enabled.

Otherwise, you can also log on to the router’s web-based utility to enable the PBC mode in WPS

settings screen(For detailed settings,please refer to your router’s user guide).

1.2 Perform PBC connection on the UI of the wireless adapter

1) On the main interface ofEnGenius’s UI, click “Profile”—“Add WPS Profile”.

2) On the Profile screen, select “Push-Button Configuration”(PBC) and then click the “Next”

button, select “Start PBC” two minutes after the router enables the WPS function. The

connection is established when the negotiating process finishes.