User's Manual

EUB600 – Dual Band Wireless-N 300Mbps Media USB Adapter

NOTE:

If the SSID broadcast function of the wireless router or AP you wish to connect is disabled, then

the wireless adapter can not scan the SSID, thus you need to connect by creating the

corresponding profile.

2.Ad-Hoc Profile management

Using the Ad-hoc mode to establish a wireless network requires that each computer should be

equipped with a wireless network adapter. By connecting these wireless adapters, computers are

able to share the resources. The detailed setting steps are as follows:

1）Firstly you’ll have to allocate a static IP to each wireless adapter to be connected in Ad-hoc

mode.

a.Right click “My Network Places” on your computer’s desktop and select “Properties”.

b.Right click “Wireless Network Connection”, and select “Properties”