User's Manual

MAC OS X WI-FI PROTECTED SETUP
3-11
Wi-Fi Protected Setup
If you do not want to set up a protected connection manually,
you can use the Wi-Fi protected setup function.
There are two ways to create a WPS connection: pin input con-
fig (PIN) or push button config (PBC). Before selecting either
method, click the SCAN button to locate the access points
within the proximity of the adapter.
PIN Input Config
Note:
You must enter the PIN code in your router’s configura-
tion dialog before establishing a connection.
1. Select the target access point.
2. Click the PIN button.
When the connection is established the Link Status sec-
tion will show the connection information. See Link Status
for more details.
Router_1
Router_2