User's Manual

MAC OS X ADVANCED SETTINGS
3-10
Advanced Settings
In the Advanced Settings section you can modify the 802.11b
preamble mode, QoS mode, and PSP Xlink mode.
1. Set the preamble mode setting from the 802.11b Pream-
ble Mode list. Choose Auto to let the device make the
selection, Long for better device compatibility, and Short
for better network efficiency.
2. Set the QOS mode from the QOS Mode list. The options
are Enabled or Disabled.
3. Set the PSP gaming mode from the PSP Xlink Mode list.
The options are Enabled or Disabled.
4. Set the Fragment Threshold by moving the slider control
or manually entering a value in the text box. The fragment
threshold specifies the maximum size of a packet during
data transmission. A value too low could lead to low per-
formance.
5. Set the RTS Threshold by moving the slider control or
manually entering a value in the text box. If the packet
size is smaller than the RTS threshold, the device will not
use RTS/CTS to send the data packet.
6. Click the Refresh button to refresh the settings. Click the
Apply button to save changes settings. Click Set Default
button to change the current settings back to their default
values.