User's Manual

''
Conguring PPPoE
To vief the PPPoE settings, click IPv6 then select PPPoE.
Address Mode
Select Static if your ISP assigned you the IP address, suQnet
mask, gatefay, and 3=S server addresses. In most cases, select
3ynamic.
IP Address
Enter the IP address Static PPPoE only.
User Na\e
Enter your PPPoE user name.
Password
Enter your PPPoE passford.
VeriUy Password
Retype the your PPPoE passford.
Service Na\e
Enter the ISP Service =ame optional.
Reconnect Mode
Select either Alfayson, >n3emand, or <anual.
Maxi\u\ Idle Ti\e
Enter a magimum idle time during fhich the
Internet connection is maintained during inactivity.
To disaQle this feature, enaQle Autoreconnect.
MTU
<agimum Transmission Unit  you may need to change the <TU
for optimal performance fith your specic ISP. 1#92 is the
default <TU.