User's Manual

6
Access Point Mode
These instructions apply to Qoth the 2.# 6Hi and fre`uency Qands.
The router Qy default is already congured in Access Point <ode. For optimum connectivity to a numQer of different fireless client
devices, it’s recommended that you keep the router in its default fireless settings. You can choose to have the router associate
only fith certain iterations IEEE standards and Qy doing so this fill either positively or negatively affect the router’s speed and
throughput performance.
Band
Select a fireless standard for the netfork from the follofing
options:
• 2.# 6Hi IEEE '2.11Q
• 2.# 6Hi IEEE '2.11n
• 2.# 6Hi IEEE '2.11Qg
• 2.# 6Hi IEEE '2.11g
• 2.# 6
Hi IEEE '2.11Qgn
Enable SSID#
Select the numQer of fireless groups, Qetfeen one and four,
availaQle on the netfork.
SSID[#]
Enter the name of the fireless netforks.
Auto Channel
EnaQle or disaQle having the router automatically select a
channel for the fireless netfork. Auto 2hannel is enaQled Qy
default. Select disaQle to manually assign a specic channel.
3efault , 3isaQle
Check Channel Ti\e
Fhen Auto 2hannel is enaQled, select a time period that the
system checks the appropriate channel for the router.
Channel
Fhen Auto 2hannel is disaQled, select a channel to assign to
the fireless netfork. Ealid values are from one to eleven in
the US and one to thirteen in the EU.